Subcontract dimensional inspection using CMM measurement and non-contact scanning
There are times when bringing in a third party can be critical to maintaining productivity and quality. Maybe your in-house capacity is already stretched. Perhaps you don’t have the necessary equipment. You might need support with some of the more complex measuring tasks. Or possibly, you’re looking for a more thorough, independent inspection of your part.
At AB Technology, our experience and knowledge, and use of the latest measurement technology, enables us to offer dimensional inspection, quality consulting and independent verification services. During the past three decades, we have worked within a diverse range of industry sectors, on a multitude of processes and on all types of components, fixtures and assemblies. Quite simply, we can meet your most complex and demanding CMM inspection needs.
Whether it’s finished part measurements, in-process checks, statistical process control (SPC) studies or dimensional root cause analysis, our expert engineers will carry out quick and accurate inspections which will help you identify issues and determine opportunities for improvement. With their support, you will enhance your operations and drive productivity, including streamlining cycle-times, improving accuracy and optimising Product Introduction (NPI). All procedures are performed in our temperature-controlled laboratory, using ISO 10360 UKAS calibrated state-of-the-art precision measurement equipment. You can always be assured of quality, supported by fully traceable data for a positive impact on your business and its profitability.
- 1-off component
- Batch/multi component
- High volume production
- Production Part Approval Process (PPAP)
- First Article Inspection (FAI & FAIR) – including AS9102 Form 3
- Last Article Inspection (LAI & LAIR)
- Initial Sample Inspection (ISI & ISIR)
- Repeatability and Reproducibility Studies (Gauge R&R)
- Measurement System Analysis (MSA)
- Statistical Process Control (SPC)
- Root cause analysis
- Independent correlation
- Quality containment and resolution
- Development of inspection procedures for new products
- Reverse engineering
Certificate Number: 3001
ISO 9001:2015
Certificate Number: SR0847
Expert subcontract CMM inspection services
We heavily invest in the latest hardware and software that allows our engineers to work seamlessly with your component definition and inspection requirements, handling CAD and Drawing definitions. Within our temperature controlled laboratory, our CMM’s are equipped with a range of measuring technologies including the latest Renishaw REVO-2 probe head with its unique ability to offer full 5-axis scanning. Combining all these elements allows us to deliver a high integrity inspection process with easy to understand reports.
Our Coordinate Measurement Machines (CMMs)
Mitutoyo Crysta Apex with REVO2
- 1200mm x 2000mm x 1000mm working volume
- OEM UKAS Calibration
- Extremely High accuracy
- 5 Axis REVO-2 scanning head
- RSP2 and RPS3 scanning sensors
- Temperature Compensation
- Rotary Table
- Software:
- I++ UCCserver
- Renishaw Modus
- MeasureMax (via MMclient)
Sheffield RS-70 with PH10MQ
- 1200mm x 1000mm x 1000mm working volume
- OEM UKAS Calibration
- High accuracy
- PH10MQ head
- SP25-1, SP25-2 and SP25-3 scanning sensors
- TP20 and TP200 point measuring sensors
- Software:
- I++ UCCserver
- Renishaw Modus
- MeasureMax (via MMclient)
Sheffield RS-30 with PH10MQ
- 700mm x 1000mm x 600mm working volume
- OEM Calibration
- Extremely high accuracy
- PH10MQ head
- TP20 and TP200 point measuring sensors
- Temperature Compensation
- Software:
- MeasureMax
Non-contact 3D scanning for dimensional inspection
Our non-contact scanning service provides a fast, accurate and cost-effective way to achieve full surface inspection of your component. From capturing 3D measurements from objects as small as a miniature medical device and as large as an gas turbine engine, through to delivering easy to understand inspection reports, our service can be tailored exactly to your needs.
Non-contact 3D scanning or digitising, is the process of capturing the shape, features and geometry of existing components through the use of photogrammetry or a laser scanner. Our 3D scanning tools removes the constraints of traditional contact measurement technology, making the scope of things we can scan virtually limitless.
Quality non-contact scanning for full surface inspection
3D scanning solutions are perfect for manufacturing companies that want to increase their productivity and understanding by fully digitising their component whilst maintaining the required accuracy. Our agile and versatile 3D scanning service enables us to detect quality issues faster and with more detail than traditional 2D measurement, allowing you to make more informed decisions. With AB Technology at your side, we can help you to get to grips with digital measurement and automated quality control.
Our team of professionals can take the digital 3D scan data and transform it into output formats that are the foundation for design, documentation, visualization and analysis. They have worked across multiple industrial sectors and captured a vast array of components. We can recommend the best technologies to use and the most suitable reporting formats to meet your project’s requirements.
Aerospace
- Blisks
- IBRs
- Fan & Turbine Discs
- Fan, Compressor & Turbine Blades
- Fir Tree Roots
- Stub shafts
- Nozzle Guide Vanes
- Bearing housings
- Casings, Housings & Structures
Automotive
- Turbo chargers
- Cylinder heads
- Gearbox housings
- Engine blocks
Manufacturing
- Plastic mouldings
- Injection moulding components
- Metal & Plastic Casings
- Manufacturing Fixturing
Other Industries
- Oil & Gas
- Defence
- Consumer products
- Medical
- Universities
- R&D
Want to know more?
We’d love to help, so get in touch today.
Location:
Unit 8 Crewe Close
Blidworth
Nottinghamshire
NG21 0TA
United Kingdom
Phone:
+44 (0)1623 491700
Email:
enquiries@cmminspection.co.uk
Opening hours:
Monday-Thursday: 0830-1630
Friday: 0830-1530
Weekends: Closed